Arova Neosol

Farblos / 1 l

Solvent-based stain mixing system for hardwood for industrial and professional use.

Solvent-based stain mixing system for hardwood for industrial and professional use.

Article number:1140011

Yield: approx. 8 m²/l (per application)

Application method:

Solvent-based stain mixing system based on lightfast special dyes for bright, not grain accentuating stain colours on hardwoods. The dilution or brightening can be done either with Arova Neosol Farblos 11400 (solvent-based) or with water. With the three basic stains yellow, red and black a variety of stain colours can be mixed.

Basis of the system
    • Solvent based
Advantages of the product
  • For a colourful and not grain accentuating stain
  • Lightfast special dyes for bright stain colours
  • Mixing a variety of stain colours with three basic stains yellow, red and black
Hazard warnings
  • Danger

    • EUH066
      Repeated exposure may cause skin dryness or cracking.
    • H225
      Highly flammable liquid and vapour
    • H319
      Causes serious eye irritation
    • H336
      May cause drowsiness or dizziness
    • P210
      Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P261
      Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P312
      Call a POISON CENTRE/doctor/… if you feel unwell.
    • P501
      Dispose of contents/container to ...
Area of application
    • Indoor
    • To stain fine-porous and coarse-porous hardwood in order to achieve an intense stain finish not accentuating the wood pores. 

    • Adler Neosol is recommended particularly for beech, maple, nut, cherry, birch, alder, pear, oak and ash.

    • Depending on the furniture varnish used, the product is suitable for surfaces in furniture construction and interior fittings in the application areas II - IV according to ÖNORM A 1610-12.

    • Surfaces stained with Arova Neosol 11400 ff can be painted over with both solvent-based and water-based wood varnishes.

    • Use in combination with a suitable topcoat system.

Cleaning of tools
Standards

© by adler-lacke.com